How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add the second key. It requires dealer service with a handheld computer dubbed Tech-2. A new key and transponder must be purchased and then programmed to the car.
Rotate your keys to stop one from wearing out faster than another. This will also help keep your keys in top shape.
Replacement Case
As opposed to the traditional Saab keys of old, the new keys have electronic components which makes it more difficult to duplicate. This has made car theft much more difficult than twenty years ago. It also makes it more expensive to replace lost keys.
Saab 9-3 owners should have two keys that work. If one is lost, it costs a lot of money to replace it in the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 for this.
There are ways to reduce these costs. Certain parts suppliers will utilize the code of an extra key to cut a new metal blade for a fraction of the cost of the dealer. The key must be the exact same as the original to allow it to work in your vehicle.
You can also replace the case yourself by following these steps. You'll need an flathead screwdriver and patience. With the screwdriver, pry away the plastic and take out the emergency key. When the case is opened, remove all electronics and place them into the new case. Make sure you put the correct key and badge back in the case too.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive component that can be easily and quickly replaced. The YouTube video of Cyclone Cyd demonstrates the procedure for replacing the remote fob battery with only four steps. This tutorial can be used with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to locate the button that releases the backup key inside the fob. This button is typically located on the back of the fob, right next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole on this button. This should be enough to let the fob case open in order to change the battery.
Once you have installed the new battery CR1632, you are able to restore the remote key fob. You can then program it into your car. The whole process should not exceed an hour. It's a simple process that does not require any special equipment.
If you lose a key, the process is somewhat more complex but it is still able to be done. The dealer has to first verify the VIN of the vehicle and order an alternative TWICE module, as well as a key blade that is matched to the unique code. After that, they'll be required to cut the replacement key and then program it using a new software tool called MDI.
Replacement Key Fob
The key fob comes with an internal battery that is used to lock and unlock your car. The batteries are able to last for that is a long time, and they eventually go out of service. This is a frequent issue that affects all cars. The good news is that you can replace the battery in most key fobs, without having to replace the entire case. You can purchase replacement fobs from Amazon that come with all the electronic components already in place, so you'll simply open the case and replace the batteries that were in the case. You'll need to remove the emergency key before you can replace the batteries. To do this, insert the screwdriver of a small flat head into the slot in the middle. The screwdriver should be moved around the case until it will split open, making it easier to take it out.
When saab spare key to replace your keys, ensure you have a spare, since this will cut down your total cost by a substantial amount. If you have an extra key, you can request the dealer to cut the key and program it for your vehicle. This is much less expensive than purchasing a brand new key fob.
It is possible to add another key to your vehicle in the event that you don't have one, but it requires some research and effort. It will cost you a few hundred dollars to add an additional car key. The computer of the vehicle must also be programmed. Professionals can do this, but it's an expensive option.
Replacement Ignition
The new SAAB 9-3 has a more sophisticated alarm system that is based on a key code. This means that should you lose only one functioning key, getting another one could be very expensive since the car has to have a special computer module installed and it also needs to be specifically programmed to accept a new key. Most locksmiths can't do this, and even a dealer will charge several hundreds of dollars just to program the new key!
If you've lost only one working key the dealer will replace the computer in your car (known as the CIM or SAAB TWICE) in order to make a replacement, and will charge a premium for it. We can reprogram the current EEPROM on your car's computer so that it's ready for an extra key. This will save you more than 50% off what you would have to pay a dealer.
If you've been a long-time owner of an 03-11 SAAB 9-3, then you probably are aware that the ignition key isn't very robust. They can be extremely sticky, and the buttons are known to be ripped off occasionally which is why you should think about replacing your ignition key if it isn't performing as it should. The good news is that replacing the ignition key isn't as difficult as it sounds and can be done quickly with the proper tools.
